Menu 0
Home   Products   Haltech Elite 2500 + Toyota Supra JZA80 2JZ (non VVTi) Plug 'n' Play Adaptor Harness Kit
 

Haltech Elite 2500 + Toyota Supra JZA80 2JZ (non VVTi) Plug 'n' Play Adaptor Harness Kit

Haltech

$2,175.00

If you need to inquire about this part please email us at sales@platinumracingproductsusa.com or click on the   icon.

If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
  • A simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
  • The quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
  • The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
ECU OVERVIEW
Haltech's Elite 2500 ECU takes the art of engine calibration to a whole new level. Featuring a robust environmentally sealed waterproof case, drive by wire throttle control, intake and exhaust cam control, short term and long term map learning, dual channel knock control, and much more, the Elite 2500 ECU provides engine calibrators the tools they need to get the job done right. Alongside the Elite 2500 ECU is the Elite Software Programmer (ESP) that brings levels of functionality and user friendliness never seen before in an engine control package. Together they offer true cutting edge technology to tuners and performance enthusiasts worldwide.
  • Supports 1 to 12 Cylinder engines
  • 2 to 4 Rotor engines
  • Normally aspirated or forced induction
  • Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF)
  • Staged, Sequential, semi sequential, batch or multipoint injection patterns
  • Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems
  • Connect to a wide range of display dashes and expansion devices via CAN.
  • Waterproof Case (With Pocket Cover Fitted)
  • 8 x Fuel Injection Output
  • 8 x Ignition Outputs
  • 12 x Digital Outputs
  • 10 x Analogue Voltage Inputs
  • 4 x Synchronised Pulsed Inputs
  • 4 x Dedicated inputs (Dual Knock, ignition Switch & onboard MAP Sensor)
  • 2 x Dedicated Engine Position Inputs with extensive trigger type support
  • Up to 45 channels of Input & Output (I/O) expansion (via CAN)
  • USB Laptop communication (Windows)
  • ESP Calibration Software - Intuitive and easy to use
SUITS: Plug 'n' Play replacement of the factory ECU for Toyota Supra JZA80 2JZ non VVTi with manual transmission only.
INCLUDES: Elite 2500 ECU with DBW and Race Functions, injection molded plastic plug 'n' play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin TYCO plug and pins, USB programming cable and USB software key.

      Collections: HALTECH, JZ

      Category: 2jz, ECU, Elite, Haltech, jza80, Supra, Toyota


      Related Items

       

      JZ R35 VR38 Coil Bracket Kit (1jz 2jz)

      $380.00

      If you need to inquire about this part please email us at sales@platinumracingproductsusa.com or click on the   icon. This coil kit has been specifically designed as a direct...

      View full product details
       

      1JZ GTE/2J2 GTE Non VVTi Igniter Delete Patch Connector (FREE SHIPPING)

      $40.00

      If you need to inquire about this part please email us at sales@platinumracingproductsusa.com or click on the   icon. 1JZ GTE/2J2 GTE Non VVTi Igniter Delete Patch Connector

      View full product details
       

      JZ Dizzy Block Off

      $60.00

      JZ PRP dizzy block off. Your performance built JZ engine running a GE head probably doesn’t need its distributer and leads, instead of using an...

      View full product details

      Black Friday Sale use code: bfprp